Preparation

Ensure the garment is clean, dry and free from adhesive residue. Position the transfer accurately and protect any existing graphics.

Additional Instructions

1. Before removing an existing graphic, photograph and measure its original position to ensure accurate replacement.
2. Ensure the garment is clean, completely dry and free from adhesive residue before application.
3. Position the transfer accurately, protecting surrounding graphics and heat-sensitive areas.
4. Apply the initial press at 140°C for 10 seconds using light pressure.
5. Carefully peel away the carrier film while hot.
6. Cover the transfer with baking or parchment paper and press again for 5 seconds using light pressure.
7. For the finishing stage, cover with a Teflon sheet and glide the press gently across the transfer for 2 seconds using medium pressure.
8. Allow the garment to cool naturally before handling or stretching the applied graphic.